DS1233D-10
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2002 |
| Series | EconoReset |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS1233D |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Output Voltage | 5V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 50μA |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.375V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 250ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.49V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.49V |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1233D-10 Overview
As you can see, this power management is mounted through 3 terminals. Packaged in the form of a Bulk, power management is easy to use. Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. Please find attached TO-226-3, TO-92-3 (TO-226AA) functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 5V is used to conduct the PMIC chip. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by Through Hole. This power ic can be sub-categorized as Power Management Circuits. The total number of pins on this power management is 3. 3 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Through Hole is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. There is a supply current of 50μA for the power management. It is always advisable to use DS1233D, the base supervisor number, when searching for similar PMICs from the manufacturer. A power supply of 5V watts is required for the operation of this power management. Voltage supervisor can work with a supply temperature of 50μA at the most. As you may know, this PMIC comes from the well-known EconoReset series product line.
DS1233D-10 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
50μA operating supply current
DS1233D-10 Applications
There are a lot of Maxim Integrated DS1233D-10 Voltage Supervisors applications.
- External alarm
- Power communication system
- FPGA design
- Medical-specific insulation monitor
- Satellite navigation
- Leakage current detection
- Refrigeration
- Cloud computing
- DC stabilized power supply module
- Microprocessor system
