DS1233D-15
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 1999 |
| Series | EconoReset |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DS1233D |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 50μA |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.125V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 250ms Minimum |
| Min Reset Threshold Voltage | 4V |
| Max Reset Threshold Voltage | 4.24V |
| Threshold Voltage | +4.13V |
| Undervoltage Threshold | 4V |
| Overvoltage Threshold | 4.24V |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1233D-15 Overview
There are 3 terminals on this power management that allow it to be mounted. Packaging is in the form of a Bulk. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached TO-226-3, TO-92-3 (TO-226AA) functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. According to the specification, the package's peak reflow temperature is specified to be 240. The supervisor is always powered by a 5V volt supply. IC management conducts in a 1-voltage supply. Through Hole mounts power management on the wall. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Power management has a total of 3 pins. There are 3 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Mounting type Through Hole is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 50μA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to DS1233D, the base PMIC number. A power supply of 5V watts is required for the operation of this power management. The power management can work with a maximum supply temperature of 50μA. It is one of the well-known EconoReset series power ic line.
DS1233D-15 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
50μA operating supply current
DS1233D-15 Applications
There are a lot of Maxim Integrated DS1233D-15 Voltage Supervisors applications.
- Battery cars
- Multi-voltage system
- Medical-specific insulation monitor
- Refrigeration
- Stable power system
- Data storage applications
- Detection of phase loss
- Transformer load monitoring equipment
- Linux and server computing
- Power distribution systems of infant care room
