DS1233D-5+T&R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) (Formed Leads) |
| Number of Pins | 3 |
| Supplier Device Package | TO-92-3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | EconoReset |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Simple Reset/Power-On Reset |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | DS1233D |
| Output | Open Drain or Open Collector |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 50μA |
| Max Supply Current | 50μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 250ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1233D-5+T&R Overview
Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. The purpose of this IC power is to provide you with a reference of TO-226-3, TO-92-3 (TO-226AA) (Formed Leads) functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. When a supply voltage of 1 is applied to the power ic, it conducts. Power management is included in the Through Hole mount. There are 3 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Through Hole is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. The supply current of the power management is 50μA. A similar IC managements number of the manufacturer can always be found by using DS1233D, the base power ics number. A maximum supply temperature of 50μA can be used. As you can see, this IC power comes from the well-known EconoReset series of products.
DS1233D-5+T&R Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
50μA operating supply current
DS1233D-5+T&R Applications
There are a lot of Maxim Integrated DS1233D-5+T&R Voltage Supervisors applications.
- Unattended substation automation
- Dash board
- Magnetic resonance imaging
- Satellite navigation
- Utility meter
- Solar power charger
- Refrigeration
- Smartphones
- Urban rail transit weak current power monitoring
- Military electronics
