DS1233DZ-5+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| Series | EconoReset |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS1233D |
| Output | Open Drain or Open Collector |
| Pin Count | 4 |
| Max Output Current | 8mA |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 50μA |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 250ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 1.8mm |
| Length | 6.5mm |
| Width | 3.5mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1233DZ-5+ Overview
A total of 4 terminals are used to mount this power management. In terms of packaging, power management follows the Tube model. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please find attached TO-261-4, TO-261AA functions for your reference in this IC power. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. The package peak reflow temperature is specified to be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. There is a subcategory of this power ic known as Power Management Circuits. A total of 4 pins are located on this power management. 4 pins are present on the power management system. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. A Surface Mount mounting type is recommended. You should set the supervisor's temperature during -40°C~85°C TA . While in operation, this supervisor has a voltage output of Open Drain or Open Collector. For this power management, there is an 50μA volt supply current. You can always use DS1233D, the base supervisor number, to search for similar PMICs of the manufacturer. A power supply of 5V watts is required for the operation of this power management. Voltage supervisor can work with a supply temperature of 50μA at the most. A PMIC from the well-known EconoReset series of products is being offered here.
DS1233DZ-5+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
50μA operating supply current
DS1233DZ-5+ Applications
There are a lot of Maxim Integrated DS1233DZ-5+ Voltage Supervisors applications.
- Insulation fault location system
- Dash board
- Electrical fire monitoring system
- Set top box
- Important electronics for automotive protection
- Medical-specific isolation transformer
- Detection of phase sequence
- External alarm
- Household appliances
- Battery cars
