DS1233M-55+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2002 |
| Series | EconoReset |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | BOTTOM |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS1233M |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 50μA |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 200ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1233M-55+ Overview
This power management consists of 3 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Bulk model. The purpose of this IC management is to provide you with a reference of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. As a reference, this IC power includes TO-226-3, TO-92-3 (TO-226AA) functions for your convenience. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 1 supply voltage, the PMIC chip conducts. Through Hole is the one that mounts power management. Taking into account all of the pins, this power management has a total of 3. This power management system has 3 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. In this case, Through Hole is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 50μA is the recommended value. You can always use DS1233M, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature is 50μA. Supervisors from the well-known EconoReset series product line are featured in this PMIC.
DS1233M-55+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
50μA operating supply current
DS1233M-55+ Applications
There are a lot of Maxim Integrated DS1233M-55+ Voltage Supervisors applications.
- Battery cars
- Power distribution systems of ICU
- Power distribution systems of infant care room
- Leakage current detection
- Radar
- Household appliances
- WiFi router
- Refrigeration
- Detection of phase loss
- Detection of phase imbalance
