DS1233MS-55+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| Series | EconoReset |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | DS1233M |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Output Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 50μA |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 200ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Length | 4.9mm |
| Width | 3.9mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1233MS-55+ Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaging is in the form of a Tube. As a reference, this IC management includes 1 functions for your convenience. Power management consists of 1 channels, each of which can be used independently. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. The total number of pins on this power management is 8. There are 8 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The mounting type of the supervisors is Surface MountTemperature setting for the supervisors should be -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. Supplied with a operating current of 50μA, this PMIC is capable of fully function as specified. To find similar IC managements from the manufacturer, you can always search by DS1233M. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 50μA. It is one of the well-known EconoReset series power ic line.
DS1233MS-55+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
50μA operating supply current
DS1233MS-55+ Applications
There are a lot of Maxim Integrated DS1233MS-55+ Voltage Supervisors applications.
- Functional modules
- Important electronics for automotive safety
- Efficient information transmission
- Transformer load monitoring equipment
- Radio
- Refrigeration
- Satellite navigation
- Military communications
- Battery cars
- Telecommunications equipment
