DS1233Z-10+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| Series | EconoReset |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS1233 |
| Output | Open Drain or Open Collector |
| Pin Count | 4 |
| JESD-30 Code | R-PDSO-G4 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 50μA |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.375V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 250ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.49V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.49V |
| Height | 1.8mm |
| Length | 6.5mm |
| Width | 3.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1233Z-10+ Overview
It is mounted through 4 terminals on the power management. Packaged in the form of a Tube, power management is easy to use. Please find attached 1 functions for your reference in this IC power. Depending on the power managment ic you are looking at, you can find a total of 1 channels. In this IC management you will find TO-261-4, TO-261AA functions for you to refer to. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. The supervisor is always powered by a 5V volt supply. Power management conducts at a voltage of 1. Surface Mount, Through Hole is the one that mounts power management. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 4 pins on the board. This power management system has 3 pins. IC management can only work with a supply voltage of 1.2V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. For this power management, there is an 50μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to DS1233, which is the base power ics number. There is a requirement for 5V power to power this power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 50μA. As you may know, this PMIC comes from the well-known EconoReset series product line.
DS1233Z-10+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
50μA operating supply current
DS1233Z-10+ Applications
There are a lot of Maxim Integrated DS1233Z-10+ Voltage Supervisors applications.
- Stable power system
- Refrigeration
- Military communications
- Medical-specific isolation transformer
- Network equipment
- Utility meter
- Important electronics for automotive protection
- Low voltage/high power - AI, GPU
- Precision measurement
- Radar
