DS1233Z-10+T&R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Supplier Device Package | SOT-223-3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Series | EconoReset |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Simple Reset/Power-On Reset |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | DS1233 |
| Output | Open Drain or Open Collector |
| Output Voltage | 5V |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 50μA |
| Max Supply Current | 50μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.375V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 250ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.49V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.49V |
| Height | 1.8mm |
| Length | 6.7mm |
| Width | 3.7mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1233Z-10+T&R Overview
In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC management you will find TO-261-4, TO-261AA functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount is the one that mounts power management. 4 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 1.2V for this PMIC. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. The supervisor's supply current is specified to 50μA. You can always use DS1233, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature that PMIC chip can work with is 50μA. As you may know, this PMIC comes from the well-known EconoReset series product line.
DS1233Z-10+T&R Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
50μA operating supply current
DS1233Z-10+T&R Applications
There are a lot of Maxim Integrated DS1233Z-10+T&R Voltage Supervisors applications.
- Microcontroller system
- Efficient information transmission
- Display equipment
- Medical-specific insulation monitor
- Electrical fire monitoring system
- External alarm
- Leakage current detection
- Dash board
- Power distribution systems of infant care room
- Electronics installed in the vehicle
