DS1233Z-15+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| Series | EconoReset |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS1233 |
| Output | Open Drain or Open Collector |
| Pin Count | 4 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 50μA |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.125V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 250ms Minimum |
| Min Reset Threshold Voltage | 4V |
| Max Reset Threshold Voltage | 4.24V |
| Threshold Voltage | +4.13V |
| Undervoltage Threshold | 4V |
| Overvoltage Threshold | 4.24V |
| Height | 1.8mm |
| Length | 6.7mm |
| Width | 3.7mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1233Z-15+ Overview
There are 4 terminals connected to this power management, which makes it easy to mount. Tube-packaging is used. In this IC power you will find 1 functions for you to refer to. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for TO-261-4, TO-261AA functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. The package peak reflow temperature is specified to be 260. When 5V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 4 pins on IC management. 4 pins make up the power management. It is recommended that Vsup should not be less than 1.2V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 50μA is the recommended value. It is always advisable to use DS1233, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management must be powered by 5V volts to function properly. A maximum supply temperature of 50μA can be used. A PMIC from the well-known EconoReset series of products is being offered here.
DS1233Z-15+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
50μA operating supply current
DS1233Z-15+ Applications
There are a lot of Maxim Integrated DS1233Z-15+ Voltage Supervisors applications.
- Power distribution systems of infant care room
- Electric heating appliances
- Rechargeable batteries
- Fire equipment power monitoring system
- Power distribution systems of CCU
- Computer applications
- Cloud computing
- Insulation fault location system
- Power distribution systems of operating room
- emergency room
