DS1233Z-5+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2002 |
| Series | EconoReset |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS1233 |
| Output | Open Drain or Open Collector |
| Pin Count | 4 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 50μA |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 250ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 1.8mm |
| Length | 6.7mm |
| Width | 3.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1233Z-5+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. In terms of packaging, power management follows the Tube model. To assist you, this IC power includes 1 functions. Power management consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes TO-261-4, TO-261AA functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 5V. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 4. This power management has 4 pins. IC management can only work with a supply voltage of 1.2V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The mounting type of the supervisors is Surface MountThis range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. For this power management, there is an 50μA volt supply current. To find similar IC managements from the manufacturer, you can always search by DS1233. It requires 5V watts of power to operate this voltage supervisor. A maximum supply temperature of 50μA can be used with this power management. Located in the well-known EconoReset series product line, this IC management is a kind of this series.
DS1233Z-5+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
50μA operating supply current
DS1233Z-5+ Applications
There are a lot of Maxim Integrated DS1233Z-5+ Voltage Supervisors applications.
- Insulation fault location system
- Leakage current detection
- Power distribution systems of operating room
- Household appliances
- Set top box
- Smart meter
- Fire equipment power monitoring system
- Military communications
- Kitchen appliances
- Leakage protection
