DS1236A-5N
| Parameters | |
|---|---|
| Power Supplies | 5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 4mA |
| Adjustable Threshold | NO |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.62V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 25ms Minimum |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | MicroManager |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PUSHBUTTON RESET INPUT |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DS1236A |
| Output | Open Drain, Push-Pull |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
DS1236A-5N Overview
A total of 16 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tube. Please find attached 1 functions for your reference in this IC power. There are 2 channels on this power managment ic that can be found in a series. In this PMIC, you can find 16-DIP (0.300, 7.62mm) functions for your reference. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. According to the specification, the package's peak reflow temperature is specified to be 260. In a 5V supply voltage, the power management conducts. Power ics operate at 1 supply voltages. The power management is mounted by a Through Hole-axis. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 16 pins in it. There should be a minimum voltage supply (Vsup) of 4.5V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type is Through Hole. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain, Push-Pull. It is estimated that the voltage supervisor's supply current is 4mA. The other features include, for example, [0], which is just one example. It is always advisable to use DS1236A, the base supervisor number, when searching for similar PMICs from the manufacturer. A power supply of 5V watts is required for the operation of this power management. The IC power that you are looking at comes from our well-known MicroManager series product line.
DS1236A-5N Features
Battery Backup Circuit type
Minimum supply voltage of 4.5V
4mA operating supply current
DS1236A-5N Applications
There are a lot of Maxim Integrated DS1236A-5N Voltage Supervisors applications.
- Refrigeration
- Display equipment
- Urban rail transit weak current power monitoring
- Precision measurement
- Power distribution systems of CCU
- Computer applications
- Smart meter
- Important electronics for automotive safety
- Insulation fault location system
- Rechargeable batteries
