Parameters |
Peak Reflow Temperature (Cel) |
245 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
DS1336 |
Number of Outputs |
5 |
Qualification Status |
Not Qualified |
Max Output Current |
300mA |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
3V |
Operating Supply Current |
250μA |
Output Current |
1.5A |
Max Supply Current |
250μA |
Turn On Delay Time |
100 ns |
Ratio - Input:Output |
5:5 |
Internal Switch(s) |
Yes |
Length |
10.3mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
1999 |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Type |
Source Selector Switch |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Applications |
Battery Backup, Industrial/Automotive, High Current Switch |
Subcategory |
Power Management Circuits |
Voltage - Supply |
3V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
DS1336S Overview
A 16-SOIC (0.154, 3.90mm Width) case is included. A Tube case is a good choice for packing the part. In this case, the part is mounted in the direction of Surface Mount. With 3V~5.5V as its voltage, it is given a temperature of 0°C. It is not allowed for this component to operate below 0°C~70°C degrees. It is fitting for the component connected in Battery Backup, Industrial/Automotive, High Current Switch. The device is categorized as Source Selector Switch. A 16 termination is available on the part. DS1336 is the base of this part. To deliver its performance, it's powered by the 5V platform. A maximum reflow temperature of this part is used if 245 is to be run. It is a part from the Power Management Circuits family. The part has 16 pins. In order to operate this part properly, the minimum supply voltage (Vsup) should be at least 3V. This device is powered by 250μA, which is the supply current it uses to operate. The voltage at 5V can be delivered by it. A 5 output is available on the board. Surface Mount-mounting is recommended. The part is capable of being delivered under 300mA output current. The output current that can be delivered to the component is determined by the 1.5A value.
DS1336S Features
in a 16-SOIC (0.154, 3.90mm Width) case
16 terminations
Peak Reflow Temperature (Cel) : 245
5 outputs
DS1336S Applications
There are a lot of Maxim Integrated DS1336S Ideal Diode controller applications.
- Active ORing for redundant power
- Active OR-ing of Redundant (N+1) Power Supplies
- Power supply reverse polarity protection
- Automotive USB hubs
- Industrial transport
- Motor drives
- Head Unit
- Building automation
- Electronic point of sale
- Factory automation and control - PLC digital output modules