DS1640SN+
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DS1640 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Current - Output (Max) | 300mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3V~5.5V |
| Rds On (Typ) | 67m Ω |
| Height Seated (Max) | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
DS1640SN+ Overview
Tube is the way it's packaged.There is a package for it in the 16-SOIC (0.295, 7.50mm Width) package.Surface Mount is the mounting type of the LED driver.It owns the Latched Driver switch type.To ensure reliable operation, set the temperature to 0°C~70°C TA.The lighting driver has a total of 4 outputs that are available for use.A voltage of 4.5V~5.5V is used to power it.A maximum output voltage of P-Channel volts can be achieved by this LED driver.I believe it belongs to the DS1640 family.It has a total of 16 terminations.As far as functions are concerned, the lighting driver has 1.There is a maximum output of 300mAV from the LED driver.High efficiency is possible at 5V supply voltage.A total of 16 pins are included in this LED driver.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).Normal operation requires a voltage above 3V for the supply voltage.In this case, the analog IC is ANALOG CIRCUIT.
DS1640SN+ Features
Supplied from 5V
DS1640SN+ Applications
There are a lot of Maxim Integrated DS1640SN+ Power Switches ICs applications.
- Wearable Devices
- Storage Drives
- HDD, SSD
- Handheld Devices
- Set-Top Boxes
- Portable/Handheld Devices
- Smart Phones, Feature Phones
- Low Voltage I/O System Power
- Hard Disk Drives
- PC Card Hot Swap
