DS1705EPA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | MicroMonitor™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PUSHBUTTON RESET OPTION |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS1705 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 130ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1705EPA Overview
Power management is mounted through 8 terminals. There is a Tube-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for 8-DIP (0.300, 7.62mm) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 3.3V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Using Through Hole, IC management is mounted. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 8 pins on the board. There are 8 pins on the power managment ic. IC management can only work with a supply voltage of 1.2V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Through Hole is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 60μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. You can always use DS1705, the base supervisor number, to search for similar PMICs of the manufacturer. In order to operate this power management, it requires 5V volts of power. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 60μA. Supervisors from the well-known MicroMonitor? series product line are featured in this PMIC.
DS1705EPA Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
60μA operating supply current
DS1705EPA Applications
There are a lot of Maxim Integrated DS1705EPA Voltage Supervisors applications.
- Insulation fault location system
- Battery cars
- Microprocessor system
- Automotive power systems
- Battery-powered equipment
- Urban rail transit weak current power monitoring
- Radio
- Medical-specific isolation transformer
- Magnetic resonance imaging
- Efficient information transmission
