DS1706EPA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | MicroMonitor™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | PUSHBUTTON RESET OPTION |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DS1706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 130ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1706EPA Overview
This power management consists of 8 mounting terminals on which it can be mounted. It is packaged with Tube. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. For your reference, this PMIC includes a list of 8-DIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 240. When 5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. By Through Hole, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. 8 pins are present in total in this power management. It is recommended that Vsup should not be less than 1.2V for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Through Hole mounting is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. During operation, this power management system outputs Push-Pull, Totem Pole. The supervisor's supply current is specified to 60μA. Supervisors are also additional features, such as [0] for example, which are worth mentioning. To find similar IC managements from the manufacturer, you can always search by DS1706. The voltage supervisor requires a power source of 5V volts in order to work correctly. A maximum supply temperature of 60μA can be used. The PMIC is a kind of the well-known MicroMonitor? series of products.
DS1706EPA Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
60μA operating supply current
DS1706EPA Applications
There are a lot of Maxim Integrated DS1706EPA Voltage Supervisors applications.
- Leakage current detection
- Household appliances
- Battery cars
- Important electronics for automotive safety
- Data storage applications
- Low voltage/high power - AI, GPU
- Network equipment
- Electronics installed in the vehicle
- Sensitive sensors
- Power distribution systems of infant care room
