DS1706LEPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | MicroMonitor™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | MATTE TIN |
| Additional Feature | PUSHBUTTON RESET OPTION |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS1706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 130ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 4.45mm |
| Length | 9.91mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1706LEPA+ Overview
There are 8 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tube. For your reference, this IC power includes a list of 1 functions. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find 8-DIP (0.300, 7.62mm) functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts in a 5V-voltage supply. Power management conducts at a voltage of 1. Power management is included in the Through Hole mount. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 8 pins in it. This power management system has 8 pins. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Through Hole is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The power management's supply current is 60μA. There are also other features in the software such as [0], just to mention a few. If you want to search for similar IC managements of this manufacturer, you can always refer to DS1706, which is the base power ics number. The voltage supervisor requires a power source of 5V volts in order to work correctly. A maximum supply temperature of 60μA can be used. The IC power that you are looking at comes from our well-known MicroMonitor? series product line.
DS1706LEPA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
60μA operating supply current
DS1706LEPA+ Applications
There are a lot of Maxim Integrated DS1706LEPA+ Voltage Supervisors applications.
- Smart meter
- Power distribution systems of ICU
- Battery cars
- Battery cars
- Telecommunications equipment
- Detection of phase imbalance
- Power distribution systems of infant care room
- Smartphones
- Analog circuit
- Medical-specific insulation monitor
