DS1706LESA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | MicroMonitor™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | TIN LEAD |
| Additional Feature | PUSHBUTTON RESET OPTION |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | DS1706 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active High |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 130ms Minimum |
| Max Input Voltage | 5.5V |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1706LESA Overview
There are 8 terminals connected to this power management, which makes it easy to mount. There is a Tube-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. Power management consists of 1 channels, each of which can be used independently. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 245. When a supply voltage of 5V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. 8 pins are present in total in this power management. This power management system has 8 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 60μA is the recommended value. There are also other features in the software such as [0], just to mention a few. A similar IC managements number of the manufacturer can always be found by using DS1706, the base power ics number. This power management requires 5V power to work. Voltage supervisor can work with a supply temperature of 60μA at the most. As you may know, this PMIC comes from the well-known MicroMonitor? series product line.
DS1706LESA Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
60μA operating supply current
DS1706LESA Applications
There are a lot of Maxim Integrated DS1706LESA Voltage Supervisors applications.
- Analog circuit
- Power distribution systems of infant care room
- Radar
- Stable power system
- Microprocessor system
- Display equipment
- WiFi router
- Utility meter
- Important electronics for automotive safety
- Multi-voltage system
