DS1707EPA+
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS1707 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 8 |
| Max Output Current | 10mA |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 60μA |
| Nominal Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 4.65V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 130ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Threshold Voltage | +4.65V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | MicroMonitor™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PUSHBUTTON RESET OPTION |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
DS1707EPA+ Overview
Power management is mounted through 8 terminals. Power management is packaged in a Tube way. Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. In this IC management you will find 8-DIP (0.300, 7.62mm) functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. When a supply voltage of 5V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. The power management is mounted by a Through Hole-axis. There is a subcategory called Power Management Circuits for this power management. There are a total of 8 pins on power management. 8 pins are present on the power management system. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.2V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Through Hole mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Push-Pull during operation. There is a 60μA supply current present in the power management. There are also other features in the software such as [0], just to mention a few. It is always advisable to use DS1707, the base supervisor number, when searching for similar PMICs from the manufacturer. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. The power management can work with a maximum supply temperature of 60μA. Supervisors from the well-known MicroMonitor? series product line are featured in this PMIC.
DS1707EPA+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
60μA operating supply current
DS1707EPA+ Applications
There are a lot of Maxim Integrated DS1707EPA+ Voltage Supervisors applications.
- Embedded computing
- WiFi router
- Radar
- Household appliances
- Efficient information transmission
- Set top box
- Electric heating appliances
- Network equipment
- Medical-specific insulation monitor
- Precision measurement
