Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2005 |
Series |
MicroMonitor™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
PUSHBUTTON RESET OPTION |
Subcategory |
Power Management Circuits |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
DS1707 |
Output |
Push-Pull, Push-Pull |
Pin Count |
8 |
Power Supplies |
5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.2V |
Operating Supply Current |
60μA |
Nominal Supply Current |
60μA |
Max Supply Current |
60μA |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Reset |
Active High/Active Low |
Voltage - Threshold |
4.65V |
Number of Voltages Monitored |
1 |
Reset Timeout |
130ms Minimum |
Max Input Voltage |
5.5V |
Min Reset Threshold Voltage |
4.5V |
Max Reset Threshold Voltage |
4.75V |
Threshold Voltage |
+4.65V |
Undervoltage Threshold |
4.5V |
Overvoltage Threshold |
4.75V |
Height |
1.5mm |
Length |
5mm |
Width |
4mm |
REACH SVHC |
Unknown |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
DS1707ESA Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. Power management is packaged in a Tube way. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts at a voltage of 5V. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. A total of 8 pins are located on this power management. This power management has 8 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Push-Pull of output voltage. Supplied with a operating current of 60μA, this PMIC is capable of fully function as specified. There are other features such as PUSHBUTTON RESET OPTION to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to DS1707, which is the base power ics number. A power supply of 5V watts is required for the operation of this power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 60μA. A PMIC from the well-known MicroMonitor? series of products is being offered here.
DS1707ESA Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
60μA operating supply current
DS1707ESA Applications
There are a lot of Maxim Integrated DS1707ESA Voltage Supervisors applications.
- Rechargeable batteries
- Network equipment
- Embedded computing
- Automotive permanent magnet synchronous motors
- DC stabilized power supply module
- Linux and server computing
- Data storage applications
- Power distribution systems of operating room
- Telecommunications equipment
- Detection of phase imbalance