DS1708REPA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | MicroMonitor™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | PUSHBUTTON RESET OPTION |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DS1708 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 130ms Minimum |
| Min Reset Threshold Voltage | 2.55V |
| Max Reset Threshold Voltage | 2.7V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.55V |
| Overvoltage Threshold | 2.7V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1708REPA Overview
It is mounted through 8 terminals on the power management. There is a Tube-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. As a reference, this IC power includes 8-DIP (0.300, 7.62mm) functions for your convenience. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 240 for the package during reflow. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. Power ics operate at 1 supply voltages. Through Hole mounts IC management. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 8 pins. It is recommended that Vsup should not be less than 1.2V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The mounting type of the supervisors is Through HoleIt is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Push-Pull as the output voltage. Supplied with a operating current of 60μA, this PMIC is capable of fully function as specified. The other features include, for example, [0], which is just one example. A similar IC managements number of the manufacturer can always be found by using DS1708, the base power ics number. The voltage supervisor requires a power source of 5V volts in order to work correctly. At most, voltage supervisor can operate at a supply temperature of 60μA. As you may know, this PMIC comes from the well-known MicroMonitor? series product line.
DS1708REPA Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
60μA operating supply current
DS1708REPA Applications
There are a lot of Maxim Integrated DS1708REPA Voltage Supervisors applications.
- Battery-powered equipment
- Power distribution systems of ICU
- Automotive power systems
- Radar
- Set top box
- Analog circuit
- Leakage protection
- Kitchen appliances
- Urban rail transit weak current power monitoring
- Electronics installed in the vehicle
