DS1708SEPA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | MicroMonitor™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | PUSHBUTTON RESET OPTION |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DS1708 |
| Output | Push-Pull, Push-Pull |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 60μA |
| Max Supply Current | 60μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 130ms Minimum |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1708SEPA Overview
There are 8 mounting terminals on the voltage supervisor, each of which has a different function. A Tube package is used to package the power management. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of 8-DIP (0.300, 7.62mm) functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 240 for the package during reflow. In a 3.3V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by Through Hole. This power ic can be sub-categorized as Power Management Circuits. There are a total of 8 pins on power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Mounting type Through Hole is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. While this power management is operating, it will output Push-Pull, Push-Pull as the output voltage. It is estimated that the voltage supervisor's supply current is 60μA. Power management is also possible to add other features such as PUSHBUTTON RESET OPTION to name a few. You can always use DS1708, the base supervisor number, to search for similar PMICs of the manufacturer. To be able to work, this power management requires 5V volts of power. The maximum supply temperature that PMIC chip can work with is 60μA. It is one of the well-known MicroMonitor? series power ic line.
DS1708SEPA Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
60μA operating supply current
DS1708SEPA Applications
There are a lot of Maxim Integrated DS1708SEPA Voltage Supervisors applications.
- Solar power charger
- Low voltage/high power - AI, GPU
- DC stabilized power supply module
- Analog circuit
- Data storage applications
- Important electronics for automotive safety
- DSP
- Smart meter
- Set top box
- Embedded computing
