DS1708TESA+T&R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | MicroMonitor™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Simple Reset/Power-On Reset |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | DS1708 |
| Output | Push-Pull, Push-Pull |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 60μA |
| Max Supply Current | 60μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 130ms Minimum |
| Min Reset Threshold Voltage | 3V |
| Max Reset Threshold Voltage | 3.15V |
| Undervoltage Threshold | 3V |
| Overvoltage Threshold | 3.15V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1708TESA+T&R Overview
It is packaged with Tape & Reel (TR). There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. Power managment ic pin count is 8. It is recommended that Vsup should not be less than 1.2V for this IC power. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Push-Pull. It is estimated that the voltage supervisor's supply current is 60μA. You can always use DS1708, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 60μA can be used. The PMIC is a kind of the well-known MicroMonitor? series of products.
DS1708TESA+T&R Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
60μA operating supply current
DS1708TESA+T&R Applications
There are a lot of Maxim Integrated DS1708TESA+T&R Voltage Supervisors applications.
- Network equipment
- Power distribution systems of ICU
- Important electronics for automotive safety
- Consumer electronics
- Personal computers
- Important electronics for automotive protection
- Military electronics
- Analog circuit
- Detection of phase loss
- Embedded computing
