DS1810-15+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2002 |
| Series | EconoReset |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS1810 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 40μA |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.12V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 4V |
| Max Reset Threshold Voltage | 4.24V |
| Threshold Voltage | +4.12V |
| Undervoltage Threshold | 4V |
| Overvoltage Threshold | 4.24V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
DS1810-15+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaging is in the form of a Bulk. Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. As a reference, this IC power includes TO-226-3, TO-92-3 (TO-226AA) functions for your convenience. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. During operation, the power ic is supplied with a voltage of 5V. During operation, the power ic is supplied with a voltage of 1. Using Through Hole, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 3 pins. Power managment ic pin count is 3. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Through HoleWe recommend setting the supervisors to -40°C~85°C TA degrees. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. For this power management, there is an 40μA volt supply current. You can always use DS1810, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature is 40μA. The IC power that you are looking at comes from our well-known EconoReset series product line.
DS1810-15+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
40μA operating supply current
DS1810-15+ Applications
There are a lot of Maxim Integrated DS1810-15+ Voltage Supervisors applications.
- Power distribution systems of operating room
- Leakage protection
- Solar power charger
- Electronics installed in the vehicle
- WiFi router
- Multi-voltage system
- DSP
- Consumer electronics
- Radar
- Sensitive sensors
