DS1811-15
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2002 |
| Series | EconoReset |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DS1811 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 40μA |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.13V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 4V |
| Max Reset Threshold Voltage | 4.24V |
| Threshold Voltage | +4.13V |
| Undervoltage Threshold | 4V |
| Overvoltage Threshold | 4.24V |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1811-15 Overview
It is mounted through 3 terminals on the power management. Bulk-packaging is used. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. In this IC management you will find TO-226-3, TO-92-3 (TO-226AA) functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. There is a specification for the peak reflow temperature of the package to be 240. IC management conducts at a voltage of 5V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Through Hole. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 3 pins that are attached to IC management. This power management system has 3 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 0V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Through Hole is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. For this power management, there is an 40μA volt supply current. You can always use DS1811, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 40μA can be used. As you can see, this IC power comes from the well-known EconoReset series of products.
DS1811-15 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 0V
40μA operating supply current
DS1811-15 Applications
There are a lot of Maxim Integrated DS1811-15 Voltage Supervisors applications.
- Rechargeable batteries
- DVR
- Personal computers
- Detection of phase imbalance
- Battery cars
- External alarm
- Solar power charger
- Precision measurement
- Data storage applications
- Set top box
