DS1813-10+T&R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) (Formed Leads) |
| Number of Pins | 3 |
| Supplier Device Package | TO-92-3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | EconoReset |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Simple Reset/Power-On Reset |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | DS1813 |
| Output | Open Drain or Open Collector |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 40μA |
| Max Supply Current | 40μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.35V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.49V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.49V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1813-10+T&R Overview
There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find TO-226-3, TO-92-3 (TO-226AA) (Formed Leads) functions for your reference. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. During operation, the power ic is supplied with a voltage of 1. Through Hole mounts power management on the wall. The pins of the power management system count 3. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 0V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Through HoleIt is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. There is a 40μA supply current present in the power management. It is always advisable to use DS1813, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 40μA. A PMIC from the well-known EconoReset series of products is being offered here.
DS1813-10+T&R Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 0V
40μA operating supply current
DS1813-10+T&R Applications
There are a lot of Maxim Integrated DS1813-10+T&R Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Power distribution systems of CCU
- Display equipment
- Important electronics for automotive safety
- Satellite navigation
- Solar power charger
- Data storage applications
- Computer applications
- DVR
- Detection of phase loss
