DS1813-5
| Parameters | |
|---|---|
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Threshold Voltage | +4.62V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2006 |
| Series | EconoReset |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PUSHBUTTON RESET OPTION |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS1813 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 40μA |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.62V |
| Number of Voltages Monitored | 1 |
DS1813-5 Overview
There are 3 terminals on this power management that allow it to be mounted. Power management is packaged in a Bulk way. Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes TO-226-3, TO-92-3 (TO-226AA) functions for your convenience. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. The package peak reflow temperature is specified to be 260. Manage ics operate at 5V supply voltages. When a supply voltage of 1 is applied to the power ic, it conducts. By Through Hole, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 3 pins in it. 3 pins make up the power management. A voltage (Vsup) that doesn't fall below 0V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The supervisor's supply current is specified to 40μA. In addition, IC management are other features such as [0], to mention only a few. If you want to search for similar IC managements of this manufacturer, you can always refer to DS1813, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 40μA. Supervisors from the well-known EconoReset series product line are featured in this PMIC.
DS1813-5 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 0V
40μA operating supply current
DS1813-5 Applications
There are a lot of Maxim Integrated DS1813-5 Voltage Supervisors applications.
- Leakage current detection
- Computer applications
- Power communication system
- Electronics installed in the vehicle
- Efficient information transmission
- Telecommunications equipment
- DSP
- Power distribution systems of ICU
- Microcontroller system
- Battery cars
