DS1813R-5+T&R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Supplier Device Package | SOT-23-3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | EconoReset |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Simple Reset/Power-On Reset |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | DS1813 |
| Output | Open Drain or Open Collector |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 40μA |
| Nominal Supply Current | 30μA |
| Max Supply Current | 40μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.62V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.75V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1813R-5+T&R Overview
Tape & Reel (TR)-packaging is used. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. When 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. This power management has 3 pins. There should be a minimum voltage supply (Vsup) of 0V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. A Surface Mount mounting type is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. For this power management, there is an 40μA volt supply current. It is always advisable to use DS1813, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 40μA. Located in the well-known EconoReset series product line, this IC management is a kind of this series.
DS1813R-5+T&R Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 0V
40μA operating supply current
DS1813R-5+T&R Applications
There are a lot of Maxim Integrated DS1813R-5+T&R Voltage Supervisors applications.
- Urban rail transit weak current power monitoring
- Important electronics for automotive safety
- Electric heating appliances
- Transformer load monitoring equipment
- Satellite navigation
- Rechargeable batteries
- Important electronics for automotive protection
- Electrical fire monitoring system
- Detection of phase sequence
- Microcontroller system
