DS1815-5
| Parameters | |
|---|---|
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DS1815 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 35μA |
| Max Supply Current | 35μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.06V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 100ms Minimum |
| Min Reset Threshold Voltage | 2.98V |
| Max Reset Threshold Voltage | 3.15V |
| Threshold Voltage | +3.06V |
| Undervoltage Threshold | 2.98V |
| Overvoltage Threshold | 3.15V |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2002 |
| Series | EconoReset |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
DS1815-5 Overview
There are 3 terminals connected to this power management, which makes it easy to mount. A Bulk package is used to package the power management. As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find TO-226-3, TO-92-3 (TO-226AA) functions for your reference. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 240. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Through Hole. This power ic can be sub-categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 3. The pins of the power management system count 3. A voltage (Vsup) that doesn't fall below 0V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. There is a supply current of 35μA for the power management. A similar IC managements number of the manufacturer can always be found by using DS1815, the base power ics number. The maximum supply temperature that PMIC chip can work with is 35μA. Located in the well-known EconoReset series product line, this IC management is a kind of this series.
DS1815-5 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 0V
35μA operating supply current
DS1815-5 Applications
There are a lot of Maxim Integrated DS1815-5 Voltage Supervisors applications.
- DSP
- Display equipment
- Fire equipment power monitoring system
- Digitally controlled LDO regulators circuit
- Computer applications
- Solar power charger
- Detection of phase imbalance
- Radar
- Radio
- Data storage applications
