banner_page

DS1819AR-10+T&R

DS1819 Voltage supervisorMicroMonitor? Series Min 1V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Nocochips NO: 503-DS1819AR-10+T&R
  • Package: SC-74A, SOT-753
  • Datasheet: PDF
  • Stock: 297
  • Description: DS1819 Voltage supervisorMicroMonitor? Series Min 1V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Supplier Device Package SOT-23-5
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2001
Series MicroMonitor™
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type Simple Reset/Power-On Reset
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Base Part Number DS1819
Output Push-Pull, Totem Pole
Output Voltage 3V
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 12μA
Nominal Supply Current 8μA
Max Supply Current 12μA
Watchdog Timer Yes
Reset Active Low
Voltage - Threshold 2.925V
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Min Reset Threshold Voltage 2.85V
Max Reset Threshold Voltage 3V
Undervoltage Threshold 2.85V
Overvoltage Threshold 3V
Height 1.3mm
Length 3mm
Width 1.75mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

DS1819AR-10+T&R Overview


In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Power management conducts at a voltage of 1. The mount is attached to Surface Mount. There are 5 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. There is a 12μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using DS1819, the base power ics number. Voltage supervisor can work with a supply temperature of 12μA at the most. The PMIC is a kind of the well-known MicroMonitor? series of products.

DS1819AR-10+T&R Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
12μA operating supply current

DS1819AR-10+T&R Applications


There are a lot of Maxim Integrated DS1819AR-10+T&R Voltage Supervisors applications.

  • Leakage current detection
  • Microcontroller system
  • Medical-specific isolation transformer
  • Power distribution systems of CCU
  • Automotive power systems
  • Kitchen appliances
  • Transformer load monitoring equipment
  • Cloud computing
  • Medical-specific insulation monitor
  • Utility meter

Write a review

Note: HTML is not translated!
    Bad           Good