DS1819CR-10+T&R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Supplier Device Package | SOT-23-5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Series | MicroMonitor™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Simple Reset/Power-On Reset |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | DS1819 |
| Output | Push-Pull, Push-Pull |
| Output Voltage | 3V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 12μA |
| Nominal Supply Current | 8μA |
| Max Supply Current | 12μA |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 2.925V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 2.85V |
| Max Reset Threshold Voltage | 3V |
| Undervoltage Threshold | 2.85V |
| Overvoltage Threshold | 3V |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1819CR-10+T&R Overview
Tape & Reel (TR)-packaging is used. Please refer to power management for SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Power management conducts at a voltage of 1. The power management is mounted by a Surface Mount-axis. There are 5 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Push-Pull as the output voltage. The supply current of the power management is 12μA. It is always advisable to use DS1819, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 12μA can be used with this power management. It is one of the well-known MicroMonitor? series power ic line.
DS1819CR-10+T&R Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
12μA operating supply current
DS1819CR-10+T&R Applications
There are a lot of Maxim Integrated DS1819CR-10+T&R Voltage Supervisors applications.
- Kitchen appliances
- Rechargeable batteries
- Transformer load monitoring equipment
- Battery-powered equipment
- Battery cars
- Computer applications
- Network equipment
- Solar power charger
- Consumer electronics
- Power communication system
