Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2003 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Sequencer |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
PUSHBUTTON RESET INPUT |
Subcategory |
Power Management Circuits |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
DS1830 |
Output |
Open Drain or Open Collector |
Pin Count |
8 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1V |
Operating Supply Current |
25μA |
Max Supply Current |
25μA |
Adjustable Threshold |
NO |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
3.3V |
Number of Voltages Monitored |
3 |
Reset Timeout |
10ms; 20ms; 50ms Minimum |
Min Reset Threshold Voltage |
2.98V |
Max Reset Threshold Voltage |
3.15V |
Threshold Voltage |
+3.06V |
Undervoltage Threshold |
2.98V |
Overvoltage Threshold |
3.15V |
Height |
950μm |
Length |
3.1mm |
Width |
3.1mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
DS1830AU+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. In terms of packaging, power management follows the Tube model. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 1 channels. IC management is packaged as a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. It is a IC power that shares many benefits with other products from the Sequencer line. IC management is specified that the package peak reflow temperature should be 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 3-voltage supply. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, the power management has 8 pins in it. 8 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The power management's supply current is 25μA. There are also other features in the software such as [0], just to mention a few. You can always use DS1830, the base supervisor number, to search for similar PMICs of the manufacturer. At the most, voltage supervisor can work with a supply temperature of 25μA.
DS1830AU+ Features
Sequencer type
Minimum supply voltage of 1V
25μA operating supply current
DS1830AU+ Applications
There are a lot of Maxim Integrated DS1830AU+ Voltage Supervisors applications.
- DC stabilized power supply module
- WiFi router
- Microprocessor system
- Magnetic resonance imaging
- Embedded computing
- Detection of phase imbalance
- Efficient information transmission
- Power distribution systems of CCU
- Network equipment
- Telecommunications equipment