DS1831AS+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| Series | MicroMonitor™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | POWER-ON-RESET |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | DS1831 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 100μA |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 3.3V 5V Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | 10ms; 100ms; 1,000ms Minimum |
| Min Reset Threshold Voltage | 2.5V |
| Max Reset Threshold Voltage | 3.3V |
| Undervoltage Threshold | 2.98V |
| Overvoltage Threshold | 3.15V |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS1831AS+ Overview
This voltage supervisor has a total of 16 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tube. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 4 channels that can be found. There are 16-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. During the reflow process, a peak temperature of 260 is specified for the package. When a supply voltage of 3.3V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 4. The power management is mounted by Surface Mount. 16 pins are present in total in this power management. Pin count of the power management is 16. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. In order to maintain a stable supply current for the power management, 100μA is the recommended value. In addition, IC management are other features such as [0], to mention only a few. A similar IC managements number of the manufacturer can always be found by using DS1831, the base power ics number. Voltage supervisor can work with a supply temperature of 100μA at the most. The IC power comes from the well-known MicroMonitor? series.
DS1831AS+ Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
100μA operating supply current
DS1831AS+ Applications
There are a lot of Maxim Integrated DS1831AS+ Voltage Supervisors applications.
- emergency room
- Detection of phase sequence
- Precision measurement
- Important electronics for automotive safety
- Automotive permanent magnet synchronous motors
- Refrigeration
- Personal computers
- Radar
- DVR
- Radio
