DS1831BS
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| Series | MicroMonitor™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | POWER-ON-RESET |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | DS1831 |
| Output | Open Drain or Open Collector |
| Pin Count | 16 |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1V |
| Operating Supply Current | 100μA |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.3V 5V Adj Adj |
| Number of Voltages Monitored | 4 |
| Reset Timeout | 10ms; 100ms; 1,000ms Minimum |
| Undervoltage Threshold | 2.98V |
| Overvoltage Threshold | 3.15V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1831BS Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. A Tube package is used to package the power management. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 4 channels that can be found. In this IC management you will find 16-SOIC (0.154, 3.90mm Width) functions for you to refer to. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. There is a specification for the peak reflow temperature of the package to be 245. When a supply voltage of 3.3V is applied to the power ic, it conducts. Power management conducts at a voltage of 4. Using Surface Mount, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 16 pins on power management. There are 16 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 100μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. For similar manage ics search of the manufacturer, you can always refer to DS1831, the base PMIC number. At most, voltage supervisor can operate at a supply temperature of 100μA. Supervisors from the well-known MicroMonitor? series product line are featured in this PMIC.
DS1831BS Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
100μA operating supply current
DS1831BS Applications
There are a lot of Maxim Integrated DS1831BS Voltage Supervisors applications.
- Leakage current detection
- Refrigeration
- Smartphones
- Personal computers
- Radio
- Power distribution systems of infant care room
- Fire equipment power monitoring system
- Military electronics
- Detection of phase sequence
- Kitchen appliances
