DS1833-10
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2002 |
| Series | EconoReset |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS1833 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 50μA |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4.375V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 250ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.49V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.49V |
| Height | 4.95mm |
| Length | 4.95mm |
| Width | 3.94mm |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1833-10 Overview
There are 3 terminals on this power management that allow it to be mounted. It is packaged with Bulk. Please find attached 1 functions for your reference in this IC power. There are 1 channels available on this supervisor, and each channel has a different function. The purpose of this IC power is to provide you with a reference of TO-226-3, TO-92-3 (TO-226AA) functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 5V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Through Hole. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 3. This power management system has 3 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Mounting type Through Hole is recommended. You should set the supervisor's temperature during -40°C~85°C TA . While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. There is a 50μA supply current present in the power management. You can always use DS1833, the base supervisor number, to search for similar PMICs of the manufacturer. It requires 5V watts of power to operate this voltage supervisor. A maximum supply temperature of 50μA can be used. The IC power that you are looking at comes from our well-known EconoReset series product line.
DS1833-10 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
50μA operating supply current
DS1833-10 Applications
There are a lot of Maxim Integrated DS1833-10 Voltage Supervisors applications.
- Functional modules
- Radio
- Digitally controlled LDO regulators circuit
- Network equipment
- Satellite navigation
- DVR
- Refrigeration
- Detection of phase sequence
- Leakage protection
- Power distribution systems of CCU
