DS1833-5+
| Parameters | |
|---|---|
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS1833 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 50μA |
| Max Supply Current | 50μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4.625V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 250ms Minimum |
| Min Reset Threshold Voltage | 4.5V |
| Max Reset Threshold Voltage | 4.75V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.5V |
| Overvoltage Threshold | 4.74V |
| Height | 4.95mm |
| Length | 4.95mm |
| Width | 3.94mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-226-3, TO-92-3 (TO-226AA) |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| Published | 2002 |
| Series | EconoReset |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
DS1833-5+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Packaging is in the form of a Bulk. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. In this IC management you will find TO-226-3, TO-92-3 (TO-226AA) functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts in a 5V-voltage supply. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Through Hole. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 3 pins in it. There are 3 pins on the supervisor. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type is Through Hole. You should set the supervisor's temperature during -40°C~85°C TA . Power management has an output of Push-Pull, Totem Pole during operation. The power management's supply current is 50μA. It is always advisable to use DS1833, the base supervisor number, when searching for similar PMICs from the manufacturer. To be able to work, this power management requires 5V volts of power. Voltage supervisor can work with a supply temperature of 50μA at the most. The IC power that you are looking at comes from our well-known EconoReset series product line.
DS1833-5+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
50μA operating supply current
DS1833-5+ Applications
There are a lot of Maxim Integrated DS1833-5+ Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Microcontroller system
- Urban rail transit weak current power monitoring
- Telecommunications equipment
- Cloud computing
- Power distribution systems of operating room
- Smart meter
- Power distribution systems of CCU
- DSP
- Power distribution systems of infant care room
