DS1836A-10
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | MicroManager |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DS1836 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 55μA |
| Max Supply Current | 55μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.37V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 200ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Threshold Voltage | +4.37V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1836A-10 Overview
It is mounted through 8 terminals on the power management. A Tube package is used to package the power management. As a reference, this IC management includes 1 functions for your convenience. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for 8-DIP (0.300, 7.62mm) functions. There are a lot of similarities between this IC management and other Battery Backup Circuit products. According to the specification, the package's peak reflow temperature is specified to be 240. A supply voltage of 3.3V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. Power management is included in the Through Hole mount. This power ic can be sub-categorized as Power Management Circuits. In total, the power management has 8 pins in it. This power management system has 8 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Through Hole mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 55μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to DS1836, which is the base power ics number. It requires 5V watts of power to operate this voltage supervisor. At the most, voltage supervisor can work with a supply temperature of 55μA. Supervisors from the well-known MicroManager series product line are featured in this PMIC.
DS1836A-10 Features
Battery Backup Circuit type
Minimum supply voltage of 1.2V
55μA operating supply current
DS1836A-10 Applications
There are a lot of Maxim Integrated DS1836A-10 Voltage Supervisors applications.
- Multi-voltage system
- WiFi router
- Power distribution systems of operating room
- Embedded computing
- Medical-specific isolation transformer
- Telecommunications equipment
- FPGA design
- DSP
- Low voltage/high power - AI, GPU
- Analog circuit
