DS1836B-10
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | MicroManager |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DS1836 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 55μA |
| Max Supply Current | 55μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 4.37V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 200ms Minimum |
| Min Reset Threshold Voltage | 4.25V |
| Max Reset Threshold Voltage | 4.5V |
| Threshold Voltage | +4.37V |
| Undervoltage Threshold | 4.25V |
| Overvoltage Threshold | 4.5V |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1836B-10 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Packaged in the form of a Tube, power management is easy to use. For your reference, this IC power includes a list of 1 functions. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 240 is specified for the package. During operation, the power ic is supplied with a voltage of 3.3V. IC management conducts in a 1-voltage supply. By Through Hole, IC management has been mounted. There is a subcategory of this power ic known as Power Management Circuits. In total, IC powers are 8 pins on the board. 8 pins make up the power management. There should be a minimum voltage supply (Vsup) of 1.2V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. Supplied with a operating current of 55μA, this PMIC is capable of fully function as specified. For similar manage ics search of the manufacturer, you can always refer to DS1836, the base PMIC number. In order to operate this power management, it requires 5V volts of power. Voltage supervisor can work with a supply temperature of 55μA at the most. It is one of the well-known MicroManager series power ic line.
DS1836B-10 Features
Battery Backup Circuit type
Minimum supply voltage of 1.2V
55μA operating supply current
DS1836B-10 Applications
There are a lot of Maxim Integrated DS1836B-10 Voltage Supervisors applications.
- Functional modules
- Household appliances
- Microprocessor system
- Battery-powered equipment
- Medical-specific insulation monitor
- Efficient information transmission
- Leakage protection
- Power distribution systems of infant care room
- Battery cars
- Embedded computing
