DS1836C-10
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | MicroManager |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DS1836 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Reset | Active Low |
| Voltage - Threshold | 2.88V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 200ms Minimum |
| Supply Current-Max (Isup) | 0.055mA |
| Threshold Voltage | +2.88V |
| Height Seated (Max) | 4.58mm |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1836C-10 Overview
A total of 8 terminals are used to mount this power management. Packaging is in the form of a Tube. Power management is possible to find a series of 1 functions. It is possible to find on this power management a series of 1 channels. IC management is packaged as a 8-DIP (0.300, 7.62mm) package. There are a lot of similarities between this IC management and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3.3V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. The power management belongs to the Power Management Circuits subcategory. Power management has a total of 8 pins. In this case, Through Hole is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For similar manage ics search of the manufacturer, you can always refer to DS1836, the base PMIC number. A PMIC from the well-known MicroManager series of products is being offered here.
DS1836C-10 Features
Battery Backup Circuit type
DS1836C-10 Applications
There are a lot of Maxim Integrated DS1836C-10 Voltage Supervisors applications.
- Kitchen appliances
- Personal computers
- Power distribution systems of ICU
- DVR
- Power distribution systems of operating room
- Automotive power systems
- WiFi router
- Refrigeration
- Precision measurement
- Power distribution systems of CCU
