DS1836C-10+
| Parameters | |
|---|---|
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.88V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 200ms Minimum |
| Min Reset Threshold Voltage | 2.8V |
| Max Reset Threshold Voltage | 2.97V |
| Threshold Voltage | +2.88V |
| Undervoltage Threshold | 2.8V |
| Overvoltage Threshold | 2.97V |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | MicroManager |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | DS1836 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 55μA |
| Max Supply Current | 55μA |
| Adjustable Threshold | NO |
DS1836C-10+ Overview
There are 8 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tube model. For your reference, this IC power includes a list of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. Please find attached 8-DIP (0.300, 7.62mm) functions for your reference in this IC power. There are a lot of similarities between this IC management and other Battery Backup Circuit products. According to the specification, the package's peak reflow temperature is specified to be 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by Through Hole. The power management system can be categorized as a Power Management Circuits chip. The total number of pins on this power management is 8. 8 pins are present on the power management system. IC management can only work with a supply voltage of 1.2V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Through Hole mounting is recommended. You should set the supervisor's temperature during -40°C~85°C TA . When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. For this power management, there is an 55μA volt supply current. It is always advisable to use DS1836, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management can work with a maximum supply temperature of 55μA. Located in the well-known MicroManager series product line, this IC management is a kind of this series.
DS1836C-10+ Features
Battery Backup Circuit type
Minimum supply voltage of 1.2V
55μA operating supply current
DS1836C-10+ Applications
There are a lot of Maxim Integrated DS1836C-10+ Voltage Supervisors applications.
- Microcontroller system
- Radar
- Display equipment
- Solar power charger
- Network equipment
- Analog circuit
- Stable power system
- Battery cars
- emergency room
- Kitchen appliances
