DS1836D-10
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | MicroManager |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Base Part Number | DS1836 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 55μA |
| Max Supply Current | 55μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2.88V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 200ms Minimum |
| Min Reset Threshold Voltage | 2.8V |
| Max Reset Threshold Voltage | 2.97V |
| Threshold Voltage | +2.88V |
| Undervoltage Threshold | 2.8V |
| Overvoltage Threshold | 2.97V |
| Length | 9.375mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1836D-10 Overview
As you can see, this power management is mounted through 8 terminals. It is packaged with Tube. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 3.3V is used to conduct the PMIC chip. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power management is included in the Through Hole mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. This power management system has 8 pins. IC management can only work with a supply voltage of 1.2V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. A Through Hole mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. It is estimated that the voltage supervisor's supply current is 55μA. To find similar IC managements from the manufacturer, you can always search by DS1836. The maximum supply temperature is 55μA. Located in the well-known MicroManager series product line, this IC management is a kind of this series.
DS1836D-10 Features
Battery Backup Circuit type
Minimum supply voltage of 1.2V
55μA operating supply current
DS1836D-10 Applications
There are a lot of Maxim Integrated DS1836D-10 Voltage Supervisors applications.
- Power distribution systems of ICU
- Power distribution systems of infant care room
- Battery-powered equipment
- FPGA design
- Medical-specific insulation monitor
- Solar power charger
- Functional modules
- Power distribution systems of operating room
- Smart meter
- Radio
