DS1836DS-10
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | MicroManager |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Battery Backup Circuit |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | DS1836 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Operating Supply Current | 55μA |
| Max Supply Current | 55μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2.88V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 200ms Minimum |
| Min Reset Threshold Voltage | 2.8V |
| Max Reset Threshold Voltage | 2.97V |
| Threshold Voltage | +2.88V |
| Undervoltage Threshold | 2.8V |
| Overvoltage Threshold | 2.97V |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1836DS-10 Overview
It is mounted through 8 terminals on the power management. Tube-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. IC management is packaged as a 8-SOIC (0.154, 3.90mm Width) package. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 3.3V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 8. 8 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 55μA. A similar IC managements number of the manufacturer can always be found by using DS1836, the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 55μA. The IC power comes from the well-known MicroManager series.
DS1836DS-10 Features
Battery Backup Circuit type
Minimum supply voltage of 1.2V
55μA operating supply current
DS1836DS-10 Applications
There are a lot of Maxim Integrated DS1836DS-10 Voltage Supervisors applications.
- Smart meter
- Magnetic resonance imaging
- Satellite navigation
- DSP
- Cloud computing
- Set top box
- WiFi router
- Urban rail transit weak current power monitoring
- Solar power charger
- Data storage applications
