DS2155G+T&R
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LFBGA, CSPBGA |
| Number of Pins | 100 |
| Supplier Device Package | 100-CSBGA (10x10) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 3.14V~3.47V |
| Base Part Number | DS2155 |
| Function | Single-Chip Transceiver |
| Operating Supply Voltage | 3.3V |
| Interface | E1, HDLC, J1, T1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 3.465V |
| Min Supply Voltage | 3.135V |
| Operating Supply Current | 75mA |
| Max Supply Current | 75mA |
| Current - Supply | 75mA |
| Logic Function | Transceiver |
| Data Rate | 64 kbps |
| Number of Transceivers | 1 |
| Number of Receivers | 1 |
| Number of Transmitters | 1 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DS2155G+T&R Overview
Saving board space is achieved with the 100-LFBGA, CSPBGA package.For telecommunications equipment packing, the Tape & Reel (TR) method is used.There is a type Surface Mount mount for this telecom circuit.There are 1 circuits in this telecom IC .Improved efficiency can be ensured when the supply voltage of 3.14V~3.47V is provided.Reliable performance can be offered when the operating temperature is set at 0°C~70°C.Surface Mount is mounted on telecom switching.There are 100 pins on this telecom interface.The DS2155 base part number can be used to find more related parts.An electric current of 75mA is supplied to telecom equipment .To offer designers much flexibility, it is powered by 3.3V voltage.A designer can make use of this telecom circuit by operating with the 75mA supply current.Ensure normal operation by setting the temperature to 0°C minimum.To ensure normal operation, 70°C is set at maximum.There should at least be 3.135V voltage supplied.A lower voltage than 3.465V should be supplied.Normal operation requires a supply current of 75mA.Transceivers 1 are integrated into telecommunication tools.
DS2155G+T&R Features
Available in the 100-LFBGA, CSPBGA package
Operating supply voltage of 3.3V
Operating supply current of 75mA
1 transceivers
DS2155G+T&R Applications
There are a lot of Maxim Integrated DS2155G+T&R Telecom applications.
- CSU/DSU E1/T1/J1 Interface
- ATM equipment with integrated DS1 interfaces
- E3/DS3 Access Equipment
- T1/E1/J1 Performance Monitoring
- T2 Rates PCM Line Interface
- Fractional T1/E1/J1
- Cable Telephony
- Digital subscriber line access multiplexer (DSLAM)
- Hybrid fiber coax (HFC)
- Digital Cross Connect Systems
