DS2176N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Digital Transmission Interfaces |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | DS2176 |
| JESD-30 Code | R-PDIP-T24 |
| Function | Receive Buffer |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | TDM |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 10mA |
| Max Supply Current | 10mA |
| Data Rate | 2048 Mbps |
| Telecom IC Type | ELASTIC BUFFER |
| Height Seated (Max) | 4.572mm |
| Length | 30.545mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS2176N Overview
The 24-DIP (0.300, 7.62mm) package reduces the amount of space on a board.A Tube-packing method is used to pack telecommunications equipment.The mounting type is Through Hole.1 circuits are used in this telecom IC .The operating temperature set at 0°C~70°C can offer reliable performance.The mounting is in the way of Through Hole.Configuration of the telecom circuit shows 24 terminations.The voltage it operates at is 5V.Using telecom switching's base part number of DS2176, you can find more related parts.The type of telecom IC it uses is ELASTIC BUFFER.The supply voltage is 5V, which provides designers with a lot of flexibility.To give designers much flexibility, it uses 10mA as the supply current.Digital Transmission Interfaces is a subcategory of telecommunications device .You should supply at least 4.5V volts.If the voltage supplied is lower than 5.5V, telecommunications device should be used.The supply current should be kept at 10mA for normal operation.
DS2176N Features
Available in the 24-DIP (0.300, 7.62mm) package
ELASTIC BUFFER as telecom IC type
Operating supply voltage of 5V
Operating supply current of 10mA
DS2176N Applications
There are a lot of Maxim Integrated DS2176N Telecom applications.
- Multiplexers
- Digital Cross-Connect Systems
- ISDN terminal adapter
- Voice over packet gateways
- Digital Access Cross-connect System (DACs)
- Set-Top Box
- Interfaces to DS3
- Central office
- Wireless Local Loop
- PBXs channel bank
