DS25BR100TSD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | Buffer, ReDriver |
| Applications | LVDS |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 2.08W |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DS25BR100 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Operating Supply Current | 35mA |
| Nominal Supply Current | 43mA |
| Power Dissipation | 2.08W |
| Propagation Delay | 465 ps |
| Turn On Delay Time | 465 ps |
| Max Output Voltage | 450mV |
| Min Input Voltage | -100mV |
| Max Input Voltage | 100mV |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Input | CML, LVDS, LVPECL |
| Output Polarity | COMPLEMENTARY |
| Power Consumption | 115W |
| Driver Number of Bits | 1 |
| Max Input Current | 10μA |
| Interface Standard | GENERAL PURPOSE |
| Data Rate (Max) | 3.125Gbps |
| Transmit Delay-Max | 0.465 ns |
| Supply Voltage1-Nom | 3.3V |
| Delay Time | 350ps |
| Capacitance - Input | 1.7pF |
| Signal Conditioning | Input Equalization, Output Pre-Emphasis |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS25BR100TSD/NOPB Overview
Packaging is convenient because power buffer comes in 8-WFDFN Exposed Pad.Package number Tape & Reel (TR) is ready for power buffer.It comes with a universal mout that allows for easy adaptation.Speaking of types, this is a typical Buffer, ReDriver.The op amp buffer uses a voltage of 3V~3.6V volts for its operation.The system facilitates the input of CML, LVDS, LVPECL.A -40°C~85°C should be set as the operating temperature in order to avoid malfunctions.The operational amplifier buffer is targeted at applications such as LVDS and others.It is possible to search with "DS25BR100" to get more pin-to-pin solutions for your special requirements if you are looking for some.It is possible to find 8 terminals on the op amp buffer of the assembly.Its peak reflow temperature is 260.3.3V voltage enables the splitter to handle a wide range of demanding tasks.Taking the Power buffer's pinout as an example, it starts from the 8 pins it has on its surface.8 pins are present on the op amp buffers.The Surface Mount on the board allows it to be mounted on PCBs or other boards.There are other Line Driver or Receivers's in the industry that play a significant role, like the power buffer.The power buffer is powered by 35mA voltage.For normal operation, 3.3V voltage is required.The splitter dissipates at most 2.08W watts.Normally, 43mA is the supply current for this splitter.The repeater signal is a 1 element interface.
DS25BR100TSD/NOPB Features
Mainly used in LVDS.
A standard Line Driver or Receivers.
DS25BR100TSD/NOPB Applications
There are a lot of Texas Instruments DS25BR100TSD/NOPB Signal Buffers, Repeaters, Splitters applications.
- Clock Distribution
- DSLAMs
- PECL-to-LVDS Translation
- Protection Switching
- Add/Drop Muxes
- Clock Distribution
- Network Switches/Routers
- Digital Crossconnects
- SATA SSDs or HDDs
- Communications Switchers
