DS25BR150TSD/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | Buffer, ReDriver |
| Terminal Finish | Matte Tin (Sn) |
| Applications | LVDS |
| Subcategory | Line Driver or Receivers |
| Max Power Dissipation | 2.08W |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DS25BR150 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Operating Supply Current | 43mA |
| Nominal Supply Current | 35mA |
| Power Dissipation | 2.08W |
| Max Supply Current | 35mA |
| Propagation Delay | 520 ps |
| Turn On Delay Time | 520 ps |
| Logic Function | Buffer |
| Output Characteristics | DIFFERENTIAL |
| Differential Output | YES |
| Input | CML, LVDS, LVPECL |
| Output Polarity | COMPLEMENTARY |
| Power Consumption | 90W |
| Driver Number of Bits | 1 |
| Interface Standard | GENERAL PURPOSE |
| Data Rate (Max) | 3.125Gbps |
| Transmit Delay-Max | 0.465 ns |
| Supply Voltage1-Nom | 3.3V |
| Delay Time | 350ps |
| Capacitance - Input | 1.7pF |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS25BR150TSD/NOPB Overview
The package is packed in 8-WFDFN Exposed Pad for convenient transportation of power buffer.Currently, this power buffer is ready to ship in Tape & Reel (TR) packages.Surface Mount A universal mout for easy adaptation to a wide range of heads.When we talk about types, here is a typical Buffer, ReDriver.There is no voltage involved in the operation of this op amp buffer.Input of CML, LVDS, LVPECL is enabled by it.For the operational amplifier buffer to function properly, the operating temperature should be set to -40°C~85°C.In addition to applications for LVDS, this operational amplifier buffer is also intended for other applications.You can get more pin-to-pin solutions for your specific needs by searching with "DS25BR150".An op amp buffer of the op amp buffer is equipped with 8 terminals.Reflow temperature at its peak is calculated to be 260.As the splitter is supplied with a 3.3V voltage, it is able to perform a wide range of demanding tasks.Power buffer pinouts start from 8 pins.There are 8 pins on the op amp buffers.It has a Surface Mount for mouting on PCB or other boards.Power buffers like this one play a critical role in the industry.In order for this power buffer to operate, a voltage of 43mA must be applied.It is necessary to supply voltage 3.3V for normal operation.It dissipates a maximum of 2.08W watts of power.Splitters should be powered by 35mA-volts under normal conditions.An interface repeater signal with 1 elements.
DS25BR150TSD/NOPB Features
Mainly used in LVDS.
A standard Line Driver or Receivers.
DS25BR150TSD/NOPB Applications
There are a lot of Texas Instruments DS25BR150TSD/NOPB Signal Buffers, Repeaters, Splitters applications.
- Clock Distribution
- Cellular Phone Base Stations
- PECL-to-LVDS Translation
- Backplane Interconnect
- Portable IPC/HMI
- Test Equipment
- Protection Switching
- Storage Area Networks
- Clock Distribution
- Industrial/Embedded PC
