DS25CP104ATSQ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-WFQFN Exposed Pad |
| Number of Pins | 40 |
| Weight | 54.68623mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| Type | Crosspoint Switch |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 25CP104 |
| Output | SEPARATE OUTPUT |
| Pin Count | 40 |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 4:4 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 145mA |
| Logic Function | Multiplexer |
| Data Rate | 3.125 Gbps |
| Supply Type | Single |
| Power Consumption | 518W |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Switching | MAKE-BEFORE-BREAK |
| Switch-on Time-Max | 20000ns |
| Height | 800μm |
| Length | 6mm |
| Width | 6mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS25CP104ATSQ/NOPB Overview
This is a relatively small item of digital switch that is included in the 40-WFQFN Exposed Pad in order to save space on the board.As a result, it is packaged in the way of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.Crosspoint Switch is the analog IC that the multiplexers uses.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 3V~3.6V supply voltage.This configuration includes 40 terminations as part of its basic functionality.The base part number is 25CP104, which can also be used to find its logic switch related parts.The multiplexer is supplied with 3.3V voltage.In this turn signal switch, there are 40 component pins.Single is employed as its supply type.With 40 pins, it is configured.It is mounted in the way of Surface Mount.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 3V.It is advisable to keep the maximum supply voltage (Vsup) at 3.6V in order to prevent some unnecessary failures.When a supply voltage of 3.3V is used, reliable performance of the multiplexers can be achieved.The turn signal switch's circuit consists of 1 channels that are being used for transmission in the circuit.Load stability of the multiplexers can be maintained by delivering 145mA supply voltage.
DS25CP104ATSQ/NOPB Features
Supplied in the 40-WFQFN Exposed Pad package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
Operating with the supply current of 145mA
DS25CP104ATSQ/NOPB Applications
There are a lot of Texas Instruments DS25CP104ATSQ/NOPB Signal Switches / Multiplexers / Decoders applications.
- Arithmetic Logic Units
- Data bus control
- Control unit of Central Processing unit (CPU)
- To select different devices in microprocessor input
- Steel plants
- HD surveillance system
- Electronic circuits
- Speed synchronization of multiple motors in industries
- War field flying robot with a night vision flying camera
- D/A converters
