DS25CP152TSQ/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Crosspoint Switch |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 25CP152 |
| Output | SEPARATE OUTPUT |
| Operating Supply Voltage | 3.3V |
| Circuit | 1 x 2:2 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Operating Supply Current | 13.8mA |
| Logic Function | Multiplexer |
| Data Rate | 3.125 Gbps |
| Supply Type | Dual, Single |
| Supply Current-Max (Isup) | 77mA |
| Power Consumption | 211W |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 20000ns |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS25CP152TSQ/NOPB Overview
Due to the fact that it is provided in the 16-WFQFN Exposed Pad, digital switch allows the board to be compacted.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.the multiplexers uses IC Crosspoint Switch as the analog IC.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.The turn signal switch is designed for use with a 3V~3.6V supply voltage, which gives it a lot of flexibility.Among its basic configurations are 16 terminations.The base part number is 25CP152, so you can find its logic switch related parts using that number.The turn signal switch is supplied with a voltage of 3.3V volts.Dual, Single is used as its supply type.A total of 16 pins are configured on this board.Multiplexer ics are mounted in the direction of Surface Mount.To avoid unnecessary failures, keep the supply voltage at 3V (Vsup).To avoid some unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.Providing a supply voltage of 3.3V can provide reliable performance of the multiplexers.For transmission, there are 2 channels in the turn signal switch's circuit.When a voltage supply of 13.8mA is delivered to the load, stability of the multiplexers can be maintained.
DS25CP152TSQ/NOPB Features
Supplied in the 16-WFQFN Exposed Pad package
Adopting a supply type of Dual, Single
Operating with the supply voltage of 3.3V
Operating with the supply current of 13.8mA
DS25CP152TSQ/NOPB Applications
There are a lot of Texas Instruments DS25CP152TSQ/NOPB Signal Switches / Multiplexers / Decoders applications.
- Idle motor
- Microprocessor memory systems
- Telephone network
- HD surveillance system
- Enabling different rows of memory depending on address in memory chips
- Electronics industry
- RF-based home automation system
- Small scale TV wall
- Night vision cameras
- To select different task for memory in microprocessor memory systems
