DS26LS31CM
| Parameters | |
|---|---|
| Differential Output | Yes |
| Protocol | RS422, RS485 |
| Input Characteristics | STANDARD |
| Number of Drivers/Receivers | 4/0 |
| Number of Drivers | 4 |
| ESD Protection | No |
| Transmit Delay-Max | 15 ns |
| Out Swing-Min | 2 V |
| High Level Input Current-Max | 0.00002A |
| Height | 1.45mm |
| Length | 9.91mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Driver |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Technology | BIPOLAR |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | DS26LS31 |
| Pin Count | 16 |
| Output Voltage | 2.5V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422 |
| Nominal Supply Current | 60mA |
| Output Current | 20mA |
| Max Supply Current | 60mA |
| Output Characteristics | 3-STATE |
DS26LS31CM Overview
Due to the enhanced 16-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.In the Tube package, this receiver is mounted.Since this part is a Driver can transceiver, a number of solutions have been able to utiliDrivere it for various purposes.PCBs or development boards with Surface Mount-types can accommodate this wide receiver.A differential driver like this uses 4.5V~5.5V of power.Up to 4/0 receivers/drivers can be installed simultaneously on this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.An operating voltage range of 5V is suitable for this line driver ic.This integrated circuit has 16 terminations designed for driving and receiving signals from data.The pinouts for this transceiver are standardized to meet the needs of the market.Since the base part number DS26LS31 describes the product type, temperature, package, etc., you might get more options by searching with it.It is a 16-pin driver IC with enhanced power dissipation controls.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.Driver ICs such as this one are designed to operate from 5V power sources.The part is embedded with 4 drivers, so it can be used with 4 devices.A can transceiver that has a current input of 60mA or greater may be affected by malfunctions.The device is capable of delivering voltage at the 2.5V axis.In this bluetooth transceiver, a 20mA output current is provided as an output.
DS26LS31CM Features
Tube package
16 pin count
16 pins
5V power supply
DS26LS31CM Applications
There are a lot of Texas Instruments DS26LS31CM Drivers/Receivers/Transceivers applications.
- Military satellite communications
- SONET/SDH Network
- Aircraft navigation
- Wireless interactive experience
- transmission relay
- Datacom networking applications
- Sensor reporting
- Fast Ethernet
- Wireless access points
- Wireless HD Photography
