DS26LS32ACM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 547.485991mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Current Rating | 25A |
| Base Part Number | DS26LS32 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 70mA |
| Nominal Supply Current | 70mA |
| Differential Output | NO |
| Protocol | RS422, RS423 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 0/4 |
| Receiver Hysteresis | 100mV |
| Receive Delay-Max | 35 ns |
| Number of Receivers | 4 |
| Height Seated (Max) | 1.753mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS26LS32ACM Overview
The enhanced 16-SOIC (0.154, 3.90mm Width) package makes it an excellent LED driver.The Tube package contains this receiver.Since this is a Receiver can transceiver, many solutions can use it for a variety of functions.Any Surface Mount-type PCB or development board can be used with this wide receiver.It takes 4.5V~5.5V from the power supply to run this differential driver.As many as 0/4 receivers/drivers are eligible for use on this electronic part.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.An operating voltage range of 5V is suitable for this line driver ic.Integrated into this wide receiver are 16 terminations that are used for driving and receiving signals from data.In this package, you will find 16 market-standard pinouts for this transceiver.Since the base part number DS26LS32 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.16-pin driver IC with improved power dissipation control.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.There is a voltage supply of 5V required in order for this transceiver module to be operated.This driver IC is designed to operate from a 5V power supply.There are also 4 receivers in it as well.The integrator circuit is embedded with 0 drivers.This integrating circuit is able to drive LEDs with an input voltage of 70mA.
DS26LS32ACM Features
Tube package
16 pin count
16 pins
5V power supply
DS26LS32ACM Applications
There are a lot of Texas Instruments DS26LS32ACM Drivers/Receivers/Transceivers applications.
- Wireless communication
- Wireless network systems
- Tuner
- Mainframes, workstations or storage devices
- Single fiber bidirectional application
- Carrier phase observations
- Metro access rings
- Switches
- Interconnection between switches and computers
- Wired telephone
