DS2712E+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -20°C~70°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | DS2712 |
| Pin Count | 16 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Operating Supply Current | 250μA |
| Output Current | 20mA |
| Adjustable Threshold | NO |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.5mA |
| Nominal Input Voltage | 5.5V |
| Battery Chemistry | Multi-Chemistry |
| Number of Cells | 1 ~ 2 |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DS2712E+ Overview
There is a package named Tube that contains it.In the package 16-TSSOP (0.173, 4.40mm Width), there is a version of it.A Surface Mount mounting type is assigned to the device.Ideally, the temperature should be set to -20°C~70°C TA in order to ensure reliable performance.In order to operate this device, an analog IC of POWER SUPPLY MANAGEMENT CIRCUIT must be used.It is possible to find related parts of this device by using the base part number DS2712.In general, the number of terminations found within it is 16 as a whole.It is equipped with 16 pins.It is necessary to connect the 16 pins during the installation process of this product.The system currently provides 1 channels for the user to use.The device should operate on a 5VV battery.It is crucial that the supply voltage of the device does not exceed 5.5V for the device to work properly.A device of this type will have its output current set to 20mA in this case.The device you are looking at belongs to the subcategory of Power Management Circuits.A power supply voltage as low as 4V can be used for it and it will work as well as possible.Aligning it with Surface Mount is required for mounting.During the design process, Vsup (maximum supply voltage) was set to 0.5mA.The part's power supply is set to a value of 5V.Current is flowing through the gadget's supply at 250μA volts.A maximum input voltage of 5.5V volts can be applied to it.
DS2712E+ Features
1 channels
Power Management Circuits subcategory
16-TSSOP (0.173, 4.40mm Width) package
DS2712E+ Applications
There are a lot of Maxim Integrated DS2712E+ Battery Chargers ICs applications.
- Forklift
- Cellphones
- Solar charging
- Wireless headphones
- Remote sensor
- Wireless power
- Smart power strips
- Truck dealers
- PDAs
- Mobile point-of-sale (mPOS) terminals
